Required Tool List For I Integrated Metals and Machine Tool Technology

The following tools are required for training in both the Integrated Metals and Machine Tool Technology options. Note that students seeking the Integrated Metals degree option will also be required to have the tools for welding listed on the next page. The tools on this list represent a basic job entry requirement, some jobs may require more but few require less. Please wait for the vendor list that will be available the first day of lab classes and CONSULT with your Instructor BEFORE YOU BUY ANY ITEM ON THIS LIST. Tools will not be required until safety tests and lab orientation is completed.

We encourage students to buy quality precision tools that should last a lifetime, anything less may not satisfy accuracy requirements or have a short life expectancy. Our advisory committee strongly suggests students have their own tools and learn to care for them properly.

Buy One Of Each Item    These Are The Acceptable Brands Listed Below
With ID Numbers
Safety Glasses 0 Any (ANSI Z87.1)
Lock 0 Any
Hex Key Inch to 3/8" 0 Eklind (10213)
(Long Handle) 0 Bondhus (12137)
  0 Allen (56081)
Hex Key Metric to  Omm 0 Eklind (10609)
(Long Handle) U Bondhus (12199)
  0 Allen (56149)
Steel Rule Flexible 6" 4R 0 Mitutoyo (182 201)
  0 Starrett (C304R-6)
  0 Brown and Sharpe (599-323-604)
Combination Square Set
(4 piece) 0 Starrett (50042)
Prick Punch 3'" 0 Proto (J441-4)
  0 Armstrong (70-251)
  0 Starrett (816A)
Center Punch'/ 1 1
6 "
0 Proto (J413-8)
0 Armstrong (70-235)
0 Starrett (117D)
Scribe 0 General (88CM)
W' Square HSS Tool Bit (3) 0 Any HS5
Caliper .001Grad. 6 inch
Digital 0 Mitutoyo (500-752- 0)
Digital 0 Mitutoyo (500-196-20)
Magnetic Base 0 SPI(14-238-0)
  0 Noga (MG61003)
Buy One Of Each Item  These Are The Acceptable Listed Below
Brands With ID Numbers
Edge Finder Ya"0 Any Cheap Shank .2000" Tip
Measuring Tape 12"      0 Lufkin (2212)
0 Stanley (33-212)
Screwdriver >"'               0 Any
Straight Blade
Screwdriver #2 Phillips   0 Any
Ball Pein Hammer 12oz.   0 Proto (J1312PD)
0 Vaughan ( 15430)
Micrometer 0-1" .0001  0 Mitutoyo (103-260)
Grad. Carbide Faces      0 Mitutoyo  (103-135)
0 Starrett (67997)
0 Starrett (67999)
Micrometer 1-2" .0001  0 Mitutoyo (103-262)
Grad. Carbide Faces       0 Mitutoyo (103-136)
0 Starrett (68005)
0 Starrett (68007)
Dial Indicator 0-1"         0 SPI(24-300-6)
Range .001Grad.            0 Mitutoyo (2416S)
0 Starrett (53295)
0 Teclock (A -921)
Tool Box                        0 Kennedy (526)
  Highlighted fields are the required tools for the program. If you wish to purchase additional tools as the program progresses the second list contains recommendations.
© 2014 Mt. Hood Community College | 26000 SE Stark St. | Gresham, OR 97030 | 503-491-6422
 Last Modified: 9/10/2014 11:22:06 AM